Diagnose and configure modules in your Ford Focus 2 or C-Max I using an ELM327 or ELS27 interface. These tools provide CAN-bus access to various vehicle systems.
Supported Modules and Functions:
Engine Control Module (ECM): Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM) for the following engine types: ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145).
Instrument Cluster (Dashboard): Access module information, read and clear DTCs, configure settings, reboot the module, and adjust/correct odometer readings.*
Brake Control Module (BCM): Access module information, read and clear DTCs, configure settings, reboot the module, perform DDS calibration reset, and initiate brake bleeding.*
Body Control Module (BCM): Access module information, read and clear DTCs, configure settings*, and reboot the module.
Central Gateway Module (CGM) / Restraint Control Module (RCM): Access module information, read and clear DTCs, configure settings, reboot the module, and clear crash data.*
Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset KAM.*
Climate Control Module (CCM): Access module information, read and clear DTCs.
Audio Control Module: Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.
*Some features require the full version of the application.
ELM327 Modification: For full application functionality and access to more modules, a minor modification to your ELM327 adapter is required. Instructions can be found here: Http://forffclub.narod.ru/index/0-2
ELS27 Information: ELS27 can be purchased at: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT-2, use the ELS27 Baudrate utility to set it to 2,000,000.
